Metering                              Back to fader8's audio blog Index

From the manual:

Input Level Meter 

Vu-meter not peak-meter, referenced to -16 dB Fs by default, with auto scale depending of the threshold values.

When the MS Width section is engaged, the M (Mid) level is displayed on the left meter. S (Side) is displayed on the right

meter.

The green index reflects the threshold value.

I need to take a closer look at this metering system. The reference levels and ballistics appear to change based on what the Mode setting is. It's almost as if the meter is showing graphically the detection algorithm.

  Back to fader8's audio blog Index